TÜRKÇE
ENGLISH
The black plaster to be made on the facades should be on the horizontal and vertical scale and on its side.
In order to be able to carry out this application, ano is drawn on the horizontal and vertical scale and in the gauges in the gap between the gauges and the application should be completed by filling the gaps between the gauges.
At the corners and centers, the ropes are brought to the same line. Primed concrete surfaces are primed. (inside and outside)
EPS plates are stuck to the front side surprisingly obfuscatorily by sticking.
The use of long gauges in the laminating process is important to ensure that the edges of the plate surfaces are aligned. Thus, there will be no inward or outward swelling, breakage, or the like at the center or edges of the sheets.
The anchors are fitted with 6 units for square meters.
All corners should have a cornice edge profile.
160 grams of plaster files will be attached to the front with heat insulation plaster mortar as 10 cm thick. Then second floor plaster will be made on it and mineral coating (decorative plaster) is made on it and it is made ready for surface coating.
The prepared surface is cleaned from construction dirts such as plaster- decorative plaster remnants, burrs and so on. Paint application is made (at least 2 coats) and the process is terminated.
What should be considered in the construction of visual applications;
All areas that are used for decorative embossing, decorations, outcrops and applications for decorative purposes in the windows, centers, balconies and facade corners and facades by using scales and floor screeds should be on the same level on the scale and miter, thus it will provide integrity and the same applications in different regions will not change. The joints will be fixed with repair mortar and the process will be completed with decorative application and painting.
