Is exterior facade covering useful?

There are informations such as exterior facade coating, joint gap facade cladding, is joint gap facade cladding useful, heat insulation and exterior facade cladding.

Is exterior facade covering useful?

Covering is designed to prevent heat loss due to thermal conductivity of building materials.

Even if the inner walls of the buildings are covered with coatings, the correct application will be made from the outside of the building and all the buildings are built since there will be heat bridges between the floors.

It is of utmost importance that the materials you will use in the coating are chosen at the right thickness according to the climatic conditions of your region.

Insulation will be obtained in direct proportion to the thickness of the material to be used. Please choose materials that are suitable for TSE825 Building Heat Insulation Rules Standard.

Your heating and cooling expenses reduced by heat insulation have benefits for the family budget, reduction of environmental pollution through the use of more energy resources and less carbon monoxide emissions.

One of the first and most important points to note in the coating is that you choose the coating in the thickness of the zone where the structure is located in accordance with the climatic conditions. Remember that you will get accurate proportional heat insulation with the thickness of the material you use. 

The materials that are necessary except the styrofoam to be used in the classical coating: anchor, coating net, insulation plaster, decorative plaster, lining and paint. 

The consumption amounts of the materials used in the classical coating are as follows;

In addition to the classic coating, there are alternative materials, these are the ready coating plates. In the market, it is called joint coating. Joint coatings are coated with acrylic emulsion-based plaster after the styrofoam blocks are cut to desired sizes and shapes and ready for use. Joint coatings do not require the use of other materials such as anchors, nets, etc. Optional anchors can be used.

Its application is easy and fast. It has high insulation value. It adds architectural value as well as insulation.

With the use of anchor, you do not need to have a hole in your building, and your building does not overload with plaster and decorative needless construction.